About TrueEngage DIDs
What a TrueEngage DID is, how a TrueEngage call reaches Genesys Cloud, and where to find your DIDs.
A TrueEngage DID is the number that connects a TrueEngage call to your Genesys Cloud routing. Web calls (click-to-call), web video calls, scheduled video meetings and video kiosk calls reach Genesys Cloud as standard SIP calls addressed to a DID, and the DID decides which call route, Architect flow and queue each call lands in.
This article is for Genesys Cloud admins and partners setting up a TrueEngage deployment. Interactions stay queued, routed, recorded and reported natively in Genesys Cloud.
What a DID is in TrueEngage
A TrueEngage DID is a virtual routing number that Genesys Cloud uses to match a TrueEngage call to a call route. A DID (direct inward dialing number) is the number an inbound call is addressed to. TrueEngage DIDs exist only on the TrueEngage BYOC Cloud trunk and are used for routing.
BYOC (Bring Your Own Carrier) Cloud is the Genesys Cloud option for connecting a carrier to Genesys Cloud over a SIP trunk. When TrueEngage is installed from AppFoundry, the install creates a BYOC Cloud trunk and reserves a range of 200 DIDs for your account. Each time you create a deployment in the TrueEngage panel, TrueEngage assigns it one DID per channel from that range, so Web Call, Video Call and Scheduled video meeting each get their own DID.
| Property | TrueEngage DID |
|---|---|
| Created | 200 DIDs reserved per account at install. Each new deployment gets one DID per channel |
| Lives on | The TrueEngage BYOC Cloud trunk |
| Shown in Genesys Cloud | DID Assignments, with the service provider TrueEngage |
| Reachable from a phone | No. It cannot be dialled from the public phone network (PSTN) |
| Bought or ported | No. Nothing is purchased or ported |
| Effect on your existing numbers | None. Existing DIDs and call routes stay as they are |
| Reuse | A DID from a deleted deployment can be assigned to a new deployment |
The DID only tells Genesys Cloud where to send the call. Everything after that (the Architect flow, IVR, queue, recording and reporting) works the same as for any other inbound call.
How a TrueEngage call reaches Genesys Cloud
A TrueEngage call starts in the browser as WebRTC and enters Genesys Cloud as a SIP call addressed to the DID. WebRTC is the browser technology for real-time voice and video without plugins or downloads.
- The visitor clicks Call or Video on the TrueEngage widget, a video kiosk or a QR page.
- TrueEngage opens a WebRTC session on its media platform.
- The media platform turns the session into a SIP INVITE addressed to the channel's DID and sends it over the TrueEngage BYOC Cloud trunk.
- Genesys Cloud matches the DID to a call route. The call route starts its Architect inbound call flow.
- The flow runs as for any inbound call (IVR, schedule checks, Transfer to ACD) and the call is queued and routed to an agent.
- For video, the agent answers the call and joins the video session through the TrueEngage Agent App. The voice leg is recorded in Genesys Cloud.
Where to find your DIDs
Each deployment shows its DIDs in the TrueEngage panel under Deployments → Edit → Routing, one on each channel card. The DID is read-only there because TrueEngage assigns it when the deployment is created. Your Genesys Cloud admin decides where each DID routes. To set that up, see Route a TrueEngage DID to a call flow.
Common questions
| Question | Answer |
|---|---|
| Can customers dial a TrueEngage DID from a phone? | No. A TrueEngage DID is reachable only through TrueEngage |
| Do we need to buy or port numbers? | No. 200 DIDs are reserved for your account at install |
| Can we use our own phone numbers as TrueEngage DIDs? | No. TrueEngage DIDs are virtual numbers tied to the TrueEngage BYOC Cloud trunk. Numbers you own stay with your carrier and are not affected |
| Does TrueEngage change our existing numbers? | No. Existing DIDs and call routes are not touched |
| Is a DID per deployment or per account? | Per deployment and per channel. Each deployment gets its own DID for every channel from the 200 reserved for your account |
| How do we get another DID? | Create another deployment. TrueEngage assigns its DIDs automatically |